Technical Requirements: Audio

AJ360 publishes assets exclusively in stereo format. All programs created or commissioned must be delivered in stereo for publication.

1- Line Up:

Alignment Signal & Level specifications include:

  • A 1kHz frequency wave
  • Alignment Level (AL) set at 18dB below the maximum coding level (-18dBFS) This adheres to the full specification outlined in EBU Tech 3343.

 

2- Stereo:

The EBU Stereo Line-Up Tone features:

  • Left channel identification with a 250ms interrupt every 3 seconds
  • Continuous signal in the right channel
  • Sinusoidal waveform with phase coherence and no distortion.

This adheres to the full specification outlined in EBU Tech 3343 .

 

3- Stereo Requirements:

Stereo tracks must be configured in the A/B (Left/Right) format:

  • Left audio should be present on the A leg or Channel 1.
  • Right audio should be present on the B leg or Channel 2.

AJ360 currently follows a standard based on SMPTE RP155 .

 

4- Texted (TX) Master Audio Requirements

 

Channel 1 Channel 2 Channel 3 Channel 4
Main Stereo L – Full Mix Main Stereo R – Full Mix Mix Minus/Stereo L -Undipped- Mix Minus/Stereo R -Undipped-

 

Definitions:

  • Mix Minus (Undipped): A full mix, minus narration/translations. Music and effects should not be dipped where the narration/translations have been removed.

 

5- Textless/Clean Master Audio Requirements

 

Channel 1 Channel 2 Channel 3 Channel 4
Voice Over & Translations Sync/Sots/Grabs M+E L -Undipped- M+E R -Undipped-

 

Definitions:

  • M+E (Undipped): A mix without narration and interviews. Music and effects should not be dipped where these elements have been removed.
  • Voice Over: Can also be referred to as Narration/Commentary.
  • Translation: Audio dub over foreign language.
  • Sync/Sots/Grabs: Refers to interviewee, contributors, the sound that is integral to the story.

6- Additional Audio Stem Requirements:

You must also deliver:

  1.  A stereo WAV file of the music tracks.
  2.  A stereo WAV file of the effects tracks (including panning information).